Hydration Protective APR Adapter Type A

Hydration Protective APR Adapter Type A
  • Manufacturer: Avon Protection
  • Manufacturer's Product Number: 90662
  * Marked fields are required.
Qty*
Price $18.99

The Type A Protective Mask Adapter connects your Avon mask to the Avon CBR (Chem Bio Reservoir) X50i.  Remove the Bite Valve from your CBR Hydrolink fitting, then plug the Type A Adapter in its place.  You may now connect your mask drink tube into the Type A Adapter.  The Type A Protective Mask Adapter fits the following Avon protective masks: S10, FM 12, and JSGPM M-50, FM50, C50 and FM53.  This adapter does not work with a US military canteen (to use your Avon mask with a US military canteen, you’ll need a replacement Avon canteen cap, part number 72601-62). 

WARNING! Use of the Type A Adapter in a chemical environment requires the CBR X50i.  

Here's is a video showing how to unplug the drink coupler from the storage recess under the front module cover, and how to unwrap the external drink tube.   https://www.youtube.com/watch?v=I0IV02zAywc

Once done: 

• Push the drink coupler fully into the canteen cap.
• Turn the drink valve ON by rotating the small lever located on the left side of the front module. This rotates the internal drink tube towards the mouth.
• Hold the canteen upside down at eye level and blow into the internal drink tube to pressurize the canteen. Drink as required. When finished drinking blow through the internal drink tube to clear water from the drinking tube.
• Turn the lever in the opposite direction to turn the valve OFF to move the internal drink tube to the side of the respirator facepiece. Ensure the valve is in the position prior to disconnecting the canteen.
• Uncouple the canteen by pulling the drink coupler from the canteen cup. Do not unscrew the cap. Stow the external drinking tube and coupler within the drink coupler receptacle provided on the respirator.


 

Reviews (0) Write a Review
No Reviews. Write a Review